# 1. Given A = arcsin and cos B= 1 31 3' 2 <B<21 Find the exact...

###### Question:

1. Given A = arcsin and cos B= 1 31 3' 2 <B<21 Find the exact value of sin(A+B).

#### Similar Solved Questions

In the space provided, please report your answers to each question. Please show as many cakulations as possible. It is strongly suggested that you attach additional sheets of paper to show these calculations Name Person Number Exam Practice Problem Set (Chl-3) 1.) Using the table to the right, pleas...
##### 4.3.9 Assigned Media Match the coefficient of determination to the scatter diagram. The scales on the...
4.3.9 Assigned Media Match the coefficient of determination to the scatter diagram. The scales on the x-axis and y-axis are the same for each scatter diagram. (a) R2 =1, (b) R2 =0.94, (c) R2 = 0.62 (a) Scatter diagram Explanatory (b) Scatter diagram (C) Scatter diagram Explanatory III Explanatory Cl...
##### Minimum acceptable rate of return
Question Detailsmachine Purchased for $50000 and has a useful life of 3 years. Find its economic life using MARR of 10%a) Year Oerating Cost Salvage Value1$10000 02 $40000 03$70000 0b) Year Oerating Cost Salvage Value1 $10000$300002 $10000$200003 $10000$0...
##### Please only round at the end Which of the following electric field lines are incorrect for...
Please only round at the end Which of the following electric field lines are incorrect for point charges? Explain why 米米米* Figure A Figure B Figure C Figure D Figure G Figure E Figure F...
##### An empty tank rectangular in plan (with all sides closed) is 12.5 its cross section 0.70...
An empty tank rectangular in plan (with all sides closed) is 12.5 its cross section 0.70 m width x 0.60 m height. If the sheet m N/ma of the surface, and the tank is allowed to float in fresh water (Sa weight 9.81 KN/m) with the 0.60m wedge vertical. Show, whether the ta stable or not?...
##### Cooling a power plant
The heat capacity of liquid water is 4.2 x 106 J/m3/K. This means that 1 m3 of water will be increased in temperature by 1 K when it absorbs 4.2 x 10^6 J.a. Assuming a discharge temperature allowing a 3K change, what volume of water is needed each day to cool a 500 MW powerplant operating at 40% eff...
##### Suppose that a company has a facility located where disastrous weather conditions often occur. Should it...
Suppose that a company has a facility located where disastrous weather conditions often occur. Should it report a probable loss from a future disaster as a liability on its balance sheet? Explain....
##### Theoretical Negative Power and Resistors
We have referred to resistors dissipating heat, i.e., we have assumed that P = I∆V is always greater than zero. Could I∆V come out to be negative for a resistor? If so, could one make a refrigerator by hooking up a resistor in such a way that it absorbed heat instead of dissipating it?...
##### At one point in a pipeline the water’s speed is 3.00 m/s and thegauge pressure...
At one point in a pipeline the water’s speed is 3.00 m/s and the gauge pressure is 5.00∙104 Pa. Find the gauge pressure at a second point in the line, 11.0 m lower than the first, if the pipe diameter at the second point is twice that at the first.Note: density of water is 1000 kg/m3....
##### (prime.cpp) A prime number is a number that cannot be formed by multiplying two smaller numbers...
(prime.cpp) A prime number is a number that cannot be formed by multiplying two smaller numbers (not including 1). For example, 2, 3, 5 are prime numbers but 4 (2*2) and 6 (2*3) are not. Write a C++ program that receives the start point and end point from user and displays all the prime numbers in t...