Engineering

All new and solved questions in Engineering category

1 answer

Matt just finished his first conversation with an international student from Rwanda. He found that things went smoothly without his having to think about what he was saying even though he was a bit nervous about the interaction before it happened. Matt's experience illustrates _____. Group of answer choices

Matt just finished his first conversation with an international student from Rwanda. He found that things went smoothly without his having to think about what he was saying even though he was a bit nervous about the interaction before it happened. Matt's experience illustrates _____. Group of answer...
1 answer

Discuss the applications of numerical weather forecasting​

Discuss the applications of numerical weather forecasting​...
1 answer

An ideal gas expands in an adiabatic turbine from 1200 K and 900 kPa to 800 K. Determine the turbine inlet volume flow rate of gas, in m3/s, required to produce turbine work output at the rate of 650 kW. The average values of the specific heats for this gas over the temperature range and the gas constant are cp = 1.13 kJ/kgK, cv = 0.83 kJ/kgK, and R = 0.30 kJ/kgK.

An ideal gas expands in an adiabatic turbine from 1200 K and 900 kPa to 800 K. Determine the turbine inlet volume flow rate of gas, in m3/s, required to produce turbine work output at the rate of 650 kW. The average values of the specific heats for this gas over the temperature range and the gas con...
1 answer

Anyone who sends me a freind request or says friend me in the answers i will give them points and can help them when they need it but to get the 25-100 points i have to get the notifaction first person to answer and first person to comment will get brainlisted and i can give my Phone number or email when were friends you also have to tell me your real age

Anyone who sends me a freind request or says friend me in the answers i will give them points and can help them when they need it but to get the 25-100 points i have to get the notifaction first person to answer and first person to comment will get brainlisted and i can give my Phone number or e...
1 answer

Primary productivity is not limited by _______. a. the availability of sunlight b. time c. the availability of nutrients d. access to water

Primary productivity is not limited by _______. a. the availability of sunlight b. time c. the availability of nutrients d. access to water...
1 answer

The cantilevered W530 x 150 beam shown is subjected to a 9.8-kN force F applied by means of a welded plate at A. Determine the equivalent force-couple system at the centroid of the beam cross-section at the cantilever O.

The cantilevered W530 x 150 beam shown is subjected to a 9.8-kN force F applied by means of a welded plate at A. Determine the equivalent force-couple system at the centroid of the beam cross-section at the cantilever O....
2 answers

Technician A says a "dry park check" is a good way to check ball joints and control arm bushings for looseness. Technician B says that inner tie rod ends can be most effectively checked for wear on an alignment rack with the vehicle's weight on the wheels and the locking pins removed from the turn plates. Who is correct? A. Technician A only B. Technician B only C. Both Technician A and B D. Neither Technician A nor B

Technician A says a "dry park check" is a good way to check ball joints and control arm bushings for looseness. Technician B says that inner tie rod ends can be most effectively checked for wear on an alignment rack with the vehicle's weight on the wheels and the locking pins removed from the turn p...
1 answer

A resistor, inductor and capacitor are connected in series, each with effective (rms) voltage of 65 V, 140 V and 80 V, respectively. If the resistor is rated at 24 W, what is the average power dissipated in the circuit

A resistor, inductor and capacitor are connected in series, each with effective (rms) voltage of 65 V, 140 V and 80 V, respectively. If the resistor is rated at 24 W, what is the average power dissipated in the circuit...
1 answer

I want to cancel my membership

I want to cancel my membership...
1 answer

Discuss the effect of PRE and CLR in JK flip-flop.​

Discuss the effect of PRE and CLR in JK flip-flop.​...
1 answer

Giusp mình giải với ạ

Giusp mình giải với ạ...
1 answer

Which of the following are characteristics of coaxial network cable? (select three.)

which of the following are characteristics of coaxial network cable? (select three.)...
1 answer

Need answers for these please ​

need answers for these please ​...
1 answer

What is the basic definition of design? a method used to reduce the number of mistakes in the engineering process the vision that artists have developed to help transfer ideas to reality the progression of ideas to the final delivery of the product the ability to draw blueprints accurately

What is the basic definition of design? a method used to reduce the number of mistakes in the engineering process the vision that artists have developed to help transfer ideas to reality the progression of ideas to the final delivery of the product the ability to draw blueprints accurately...
1 answer

The e waste girls helped fellow students and the community learn about propely Reclying

The e waste girls helped fellow students and the community learn about propely Reclying...
2 answers

Ruler game, HELPPPPP

Ruler game, HELPPPPP...
1 answer

Identify the prefixes used in the International System of Units (SI) Meaning Prefix Meaning Prefix 1/1,000,000 1,000,000 1/1,000 1,000 1/100 100 1/10 10 nce

Identify the prefixes used in the International System of Units (SI) Meaning Prefix Meaning Prefix 1/1,000,000 1,000,000 1/1,000 1,000 1/100 100 1/10 10 nce...
1 answer

Definition for corrosion resistance

definition for corrosion resistance...

-- 0.013947--